Can you cut preformed countertops?

Asked by: Ms. Leatha Ortiz DDS
Score: 4.9/5 (48 votes)

To cut through laminate countertops, you can use a hand saw, but a circular saw makes the job much quicker. Because a circular saw can produce jagged edges and chip the laminate, your best bet is to lay the laminate face-side down and cut from the back to the front.

View full answer

Also Know, Can you cut countertops already installed?

Though it's possible to cut a Formica countertop that is already installed, it's not something we advise everyone to do. This project is best left to people who have a decent amount of experience with a circular saw. In many cases, it's better to ask a professional to cut your countertop for you.

Keeping this in mind, How do you cut composite countertops?. Use a router saw with a carbide blade for making larger cuts. Choose a carbide-tipped trip saw to make smaller cuts or to clean of the ends of your composite countertops.

Simply so, How can I cut my countertop without chipping?

You can minimize the potential for chipping if you use a finish blade with lots of teeth, making sure the sharp is keen. You can further reduce the chance of chipping by using masking tape along the cut line and cutting through the tape. As with all cutting, measure at least twice and mark the line well and clearly.

How do you cut an existing countertop?

Turn the laminate counter upside down so that the finished side is facing downward. Use a tape measure to determine where you need to cut it and draw a line at the location with a pencil. Put on safety glasses and plug in a jigsaw. Turn the jigsaw on and move the blade along the pencil line to cut through the counter.

25 related questions found

What is the best blade to cut laminate countertop?

What blade should I use to cut laminate countertop? If you use a circular saw, it's best to use a fine-toothed narrow blade with at least 40 teeth. When it comes to cutting laminate countertop, blades with carbide tips usually last longer than regular steel.

How do you cut laminate countertops without chipping them?

To cut through laminate countertops, you can use a hand saw, but a circular saw makes the job much quicker. Because a circular saw can produce jagged edges and chip the laminate, your best bet is to lay the laminate face-side down and cut from the back to the front.

What saw to use to cut countertop?

Cutting a post-form laminate countertop to length requires a clean, straight cut. The best DIY tool for the job is a circular saw with a fine-tooth carbide blade made for laminate (the same blades are typically sold for non-ferrous metals and other types of plastics). You can also use a jigsaw with a fine-tooth blade.

Will Home Depot cut your countertop?

Home Depot will only cut laminate, granite, and marble countertops if purchased through the store's installation service. ... IKEA can cut and install butcher block countertops. Alternatively, you can buy or rent tools such as a circular saw to cut your own countertop.

Does IKEA cut countertops to size?

Did you know: All countertops at IKEA are ready to be picked up at any time in the store. Plus, they can be cut to the length you want and you'll get 2 edging strips with each slab to cover-up any necessary seams.

What is the best way to cut a Corian countertop?

You can use a fine-tooth circular saw to cut Corian, a carbide blade with 80 to 100 teeth being ideal. If you have fewer teeth (for example, a standard 40-tooth blade), use masking tape on the Corian to reduce splintering.

Can I cut a solid surface countertop?

The solid surface countertop can now be cut using the circular saw. It's highly recommended that the cutting tool is made from carbide and has a minimum of 40 teeth, to ensure a smooth and accurate edge. The saw should be slowly run along the straight edge to help avoid the build-up of heat.

How do you cut a sink hole in a Corian countertop?

Cut the sink hole out of the countertop, using a jigsaw mounted with a fine-toothed down-cutting blade. A down-cutting blade's teeth are cut so that any chipping that might occur during the cutting is on the bottom side of the material.

How do you cut and join a laminate countertop?

To join two pieces of laminate countertop, start by measuring and cutting the pieces to ensure they'll fit. Then, turn each piece over and cut a 1/2-inch wood block to fit along the edge of the cuts you've made. Glue the pieces together along both sides of the joint and attach the block of wood with miter bolts.

What is the cheapest way to replace countertops?

Budget-Friendly Countertop Options
  1. Laminate counters are the most affordable option available. ...
  2. Tile countertops can be cost effective, depending on the material you choose. ...
  3. Butcher block has a classic appeal that complements a traditional kitchen or can add unexpected contrast to a modern space.

What is the easiest countertop to maintain?

Quartz countertops are the easiest natural stone to take care of. They are engineered using ground stone and resin, so they don't require regular sealing they way most granite and marble countertops do. This stone is non-porous, so it does not easily stain or etch.

What is the most affordable countertop?

Below are 15 popular “cheap” countertops that you will be able to find on the market.
  • Ceramic Tile.
  • Laminate.
  • Cultured Marble.
  • Granite.
  • Cultured Granite.
  • Butcher Block.
  • Bamboo.
  • Wood.

Can I use a jigsaw to cut laminate countertop?

The Bosch T101BR jigsaw blade is an ideal choice for cutting laminate materials. ... This is a popular blade often referred to as a worktop blade. It's ideal for cutting out sink openings, for example, in worktops. It gives a very clean edged cut on the decorative side of the laminated material.

Can you cut laminate sheets with scissors?

Scissors. ... If you lack another kind of trimmer, you can definitely use the scissors to trim your laminated documents especially if you used thinner film. If you do use scissors, slide them through the laminate – don't open and close the blades. This will give you a smoother cut.

How many teeth do I need to cut laminate?

Diamond-tipped blades that are made for laminate and fiber cement usually have a low number of teeth to reduce the dust produced by cutting cement. However, typical circular and miter saw blades that are used for laminate will have 80 to 100 teeth for fine, precision cutting.

What's the best tool to use to cut Formica?

Use a circular saw or laminate shears to cut the Formica into large pieces. Do not try to cut a curve with a circular saw. Cut out the shape's form, and leave the trimming for a finer saw and corners for a saw with a some flexibility. Install the Formica onto the countertop or other location.

Can you cut Ikea laminate countertops?

As with wood, laminate countertops CAN be cut in length. ... IKEA's wide variety of laminate countertops can help you achieve a great look for your kitchen at a reasonable cost.